ZJHP（M）型ZJHP型氣動薄膜調節閥由氣動多彈簧薄膜執行機構和低流阻直通單座閥（套筒閥）組成，單座閥閥體直通單座蓋上導向結構，閥芯為柱塞型結構，與普通單座閥相比具有體積小，重量輕，流量大等特點適用于流量大，泄漏量要求嚴格的場合。ZJHM型精小型套筒與普通套筒閥相比，具有體積小1/3，重量輕1/3，流量大1/3的特點，廣泛應用于要求噪音低、壓差大的工業過程自動控制系統中。

一、概述Outline

產品型號：ZJHP（M）

產品名稱：氣動薄膜調節閥

產品特點：ZJHP（M）型ZJHP型氣動薄膜調節閥由氣動多彈簧薄膜執行機構和低流阻直通單座閥（套筒閥）組成，單座閥閥體直通單座蓋上導向結構，閥芯為柱塞型結構，與普通單座閥相比具有體積小，重量輕，流量大等特點適用于流量大，泄漏量要求嚴格的場合。ZJHM型精小型套筒與普通套筒閥相比，具有體積小1/3，重量輕1/3，流量大1/3的特點，廣泛應用于要求噪音低、壓差大的工業過程自動控制系統中。

Product model: ZJHP （ M ）

Product Name: pneumatic diaphragm regulating valve

Product characteristic: ZJHP （ M ） ZJHP pneumatic diaphragm regulating valve by pneumatic spring diaphragm actuator and low flow resistance through single-seat valve （ sleeve valve ）, valve seat valve direct single seat cover guide structure, the plunger type structure, and the ordinary single-seat valve 免費信息pared with small size, light weight, flow characteristics applicable to large flow, leakage demanding situations. ZJHM type precision small sleeve sleeve valve 免費信息pared with ordinary, has small volume 1 / 3, weight 1 / 3, 1 / 3 flow characteristics, widely used in the requirements of low noise, large pressure difference of industrial process control system.

二、閥體Valve body：

閥體形式：直通單座（套筒）倒S型鑄造型閥
公稱通徑：DN20~300mm
公稱壓力：PN1.6 4.0 6.4MPa
連接形式：法蘭式按JB78-59 JB/T79.2-94凹式
材 料：HT200 ZG230—450 ZG1Cr18Ni9Ti ZG0Cr18Ni12M02Ti
上 閥 蓋：常溫型-20~ 200℃
散熱型-40~ 450℃
填 料: V型聚四氟乙烯、柔性石墨、不銹鋼波紋管

The valve body forms: direct single seat （ sleeve ） inverted S type foundry type valve

Nominal size: DN20 ~ 300mm

Nominal pressure 4 6.4MPa: PN1.6

Connection: flange type according to the JB78-59 JB / T79.2-94 concave type

Material material: HT200 ZG230 450 ZG1Cr18Ni9Ti ZG0Cr18Ni12M02Ti

The upper valve cover at room temperature: - 20 ~ 200 c

Heat radiation type - 40 ~ 450 C

Filling material: type V PTFE, graphite, stainless steel corrugated pipe

三、閥內組件The inner valve assembly：

閥芯型式：上導單座（套筒）柱塞型閥芯
流量特性：直線特性、等百分比特性或快開特性
材 料：1Cr18Ni9Ti 0Cr18Ni12Mo2Ti

Spool type: a single-seat （ sleeve ） piston type valve core

Flow characteristics: linear characteristics, and percentage of properties or fast opening characteristic

Material material: 1Cr18Ni9Ti 0Cr18Ni12Mo2Ti

四、流量特性圖Flow characteristics：

 

五、執行機構Actuating mechanism：

形 式：多彈簧式薄膜執行機構 墊 片：橡膠石棉板、1Cr18Ni9Ti
膜片材料：丁睛橡膠夾增強滌綸織物 彈簧 范圍： 20-100（40-200、80-240 、20-60
壓縮彈簧：60Si2Mn 60-100） KPa
推 桿：2Cr13 供氣 壓力：0.14 0.16 0.28MPa
膜 蓋：A3 氣源 接頭：內螺紋M10X1
襯 套：2Cr13 環境 溫度：-30~ 70℃
閥作用型式：氣一開式，氣一關式

Shape type: multi spring type thin film actuator pad sheet: asbestos rubber sheet, 1Cr18Ni9Ti

Diaphragm material: Dingqign rubber clamps reinforced polyester fabric spring range: 20-100 （ 40-200, 80-240, 20-60

A 免費信息pression spring: 60Si2Mn 60-100 ） KPa

Push rod air pressure: 2Cr13: 0.14 0.16 0.28MPa

The membrane cover: A3: M10X1 air joint internal thread

The lining sleeve: 2Cr13 environment temperature: - 30 ~ 70 C

Valve action types: gas type, close type gas

六、主要技術參數Main technical parameters：

七、ZJHP型氣動單座調節閥允許壓差ZJHP pneumatic regulating valve allows the pressure difference：

1、本表以標準規格執行機構為計算基礎。如最大工作壓差超出表列范圍，可向廠方提出，采取適當?shù)慕鉀Q辦法。
2、本表以閥門關位置為計算基礎。因此其它位置會有更大的允許壓差。

In 1, this table to the standard actuator was calculated on the basis of. Such as the maximum working pressure exceeds the list range, to the present, take appropriate solutions.

In 2, this table to the valve closed position was calculated on the basis of. So the other position will have greater allowable differential pressure.

八、ZJHM型氣動套筒調節閥允許壓差表ZJHM pneumatic sleeve adjusting valve allows the pressure differential gauge：

說明： 1、本表以標準規格執行機構為計算基礎。如最大工作壓差超出表列范圍，可向廠方提出，采取適當?shù)慕鉀Q辦法。

Note: 1, this form to standard actuator was calculated on the basis of. Such as the maximum working pressure exceeds the list range, to the present, take appropriate solutions.

九、ZJHP/M型氣動調節閥外形圖ZJHP/M type pneumatic control valve outline drawing：

                       

十、ZJHP/M型氣動薄膜調節閥外型尺寸ZJHP/M pneumatic diaphragm regulating valve dimensions：

法蘭連接尺寸
本產品的法蘭連接尺寸符合國家標準GB9115.7－88、GB9115.9－88、PN64符合JB79－59。此連接尺寸與老產品的采用的JB78－59《鑄鐵法蘭》,JB79－59《鑄鐵法蘭》中的連接尺寸基本一致,可以套用,安裝時不影響和老產品的更換。
JISB2001－1984
ANSIB16.5－1981
法蘭連接：FF、PR、RJ和LG。

Flange connection dimension

The product of the flange connection dimension in line with national standards GB9115.788, GB9115.988, PN64 meets JB7959. The connection dimension and old products used JB7859" cast iron flanges"," iron" JB7959 flange connection in basically the same size, can apply, the installation does not affect and old product replacement.

JISB20011984

ANSIB16.51981

Flange connection: FF, PR, RJ and lg.

 十一、型號編制說明Type description：